SKLI-18/20-8 roller bearing insulated swivel-Gunnebo. The electrically insulated roller bearing swivel is fully functional even at its maximum working load limit. It is tested to resist up to 1000 volts. Working Load Limit of 28,300 Lbs.
A component in the Gunnebo Lifting SK System. Can be attached to any of the other SK System components.
Supplied from the factory with a marine rated lubricant
Proof tested and certified *Design Factor 4:1
Also available in:
Inspect this product per OSHA guidelines before each use.
Johnson Block, located in Tulsa Oklahoma designs and manufactures crane blocks, shackles and roller bearing swivels for construction cranes sold around the world. In the 1980s, a merger with Gunnebo brought wire rope hooks and special chain sling fittings to the product mix. Gunnebo-Johnson Corporation produces the GrabiQ grade 100 lifting system used in mills, mines and manufacturers all over the globe.
The Caldwell tea cup pipe carrier is one of the most effective tools when lifting water and sewer pipes. This one inch model can lift up to 13 tons while providing a secure connection. Working Load Limit of 13 tons.
CM Long Reach Shackles. Columbus McKinnon is the only manufacturers of “long-reach shackles.” The shackles are made from alloy steel and meet the requirements of ASME B30.26. Working Load Limit of 10000-34000 Lbs.
Crosby S209 Screw Pin Anchor Shackles. All Crosby Shackles are Quenched and Tempered with alloy pins. On every Crosby Shackle, the working load limit and safe use angle are stamped onto the shackle body. Working Load Limit of .5-12 Tons.