• Where Rigging Comes From®

  • Quality Rigging Equipment Manufacturer Since 1945

Shop Our Rigging And Lifting Equipment

Showing 1–12 of 104 results

  • Black 5/8″ Braided Derby Rope 600' Reel.

  • Fork Lift Beam

    Working Load Limit 4,000 lbs
    Caldwell Fork Lift Beams are specifically designed to make fork lifts more versatile by providing positive handling of loads otherwise impractical for fork lifts.

    PRODUCT FEATURES:
    Easy attachment, no special wrenches or tools needed.
    Strong, sturdy, all welded construction.
    Easy to see, highly visible yellow paint.

  • CM Bandit Chain Levertool 10' lift, 3/4 Ton capacity.

  • The most well-known shackles in the rigging industry, Crosby S209T Theatrical screw pin anchor shackles are made from forged steel then it is Quenched and Tempered. The screw pin is made from an alloy, and the shackle is finished in non reflective Black Powder Coating. 6:1 design factor, meets or exceeds ASME B30.26 RR-C-271D Load rated with angle indicators.

  • The most well-known shackles in the rigging industry, Crosby S209T Theatrical screw pin anchor shackles are made from forged steel then it is Quenched and Tempered. The screw pin is made from an alloy, and the shackle is finished in non reflective Black Powder Coating. 6:1 design factor, meets or exceeds ASME B30.26 RR-C-271D Load rated with angle indicators.

  • Crosby 5/8″ Alloy Pear Ring A341. 9,000 lb WLL.

  • High Strength Theatrical Alloy Chain
    is Grade 100, 1/2″ with a
    working load of 15,000 lbs
    . this chain is used
    to adjust bridle legs without lowering back to the ground. With a 3.75″
    inside length, this chain exactly matches
    the current standard Deck Chain in use today but with 25% higher strength and less wear. Every HSTAC chain is
    equipped with a rated capacity tag including RFID for use with popular inspection software.
    100% made in
    USA
    .
    Proof load tested and certified for lifting. Black Powder Coated.

  • High Strength Theatrical Alloy Chain
    is Grade 100, 1/2″ with a
    working load of 15,000 lbs
    . this chain is used
    to adjust bridle legs without lowering back to the ground. With a 3.75″
    inside length, this chain exactly matches
    the current standard Deck Chain in use today but with 25% higher strength and less wear. Every HSTAC chain is
    equipped with a rated capacity tag including RFID for use with popular inspection software.
    100% made in
    USA
    .
    Proof load tested and certified for lifting. Black Powder Coated.

  • High Strength Theatrical Alloy Chain
    is Grade 100, 1/2″ with a
    working load of 15,000 lbs
    . this chain is used
    to adjust bridle legs without lowering back to the ground. With a 3.75″
    inside length, this chain exactly matches
    the current standard Deck Chain in use today but with 25% higher strength and less wear. Every HSTAC chain is
    equipped with a rated capacity tag including RFID for use with popular inspection software.
    100% made in
    USA
    .
    Proof load tested and certified for lifting. Black Powder Coated.

  • Mechanical Chain Sling – Grade 80

    Two leg, mechanically assembled 1/2″ Grade 80 DOSH Alloy Chain Sling with Safety Slip Hooks Both Legs and an RFID enabled capacity tag attached. Each DOSH Alloy Chain Sling is individually Proof Load Tested per OSHA requirements. Working Load Limit 20,800 lbs.

  • Mechanical Chain Sling – Grade 80

    Mechanically assembled 1/2″ Grade 80 SGG Alloy Chain Sling with a grab hook on both ends and an RFID enabled capacity tag attached. Each SGG Alloy Chain Sling is individually Proof Load Tested per OSHA requirements. Working Load Limit 12,000 lbs.

  • Assembled by Tway Lifting Products
    1/2″ Alloy Chain Sling type SGG grade 80 Working Load Limit 12,000 pounds. Chain Service Center Welded Sling with grab hook both ends and an RFID enabled capacity tag. Individually Proof Load Tested per OSHA requirements.

Showing 1–12 of 104 results

Share This Product With Your Friend