• Where Rigging Comes From®

  • Quality Rigging Equipment Manufacturer Since 1945

Crosby S2130
Bolt Type Anchor Shackles

Call For Pricing

0 out of 5

S2130 Crosby Bolt Type Anchor Shackles. Forged, Quenched and tempered, Crosby Bolt Type Anchor Shackles provide the highest quality in the industry. They are produced in hot dipped galvanized or self-colored styles for specific jobs/preferences.
Working Load Limit of 2-12 tons.


Clear selection
SKU: S21031019481. Categories: , , , .

Supplier :


Email this page


Crosby Bolt Type Anchor Shackles S2130

Crosby Bolt Type Anchor Shackles are forged, quenched and tempered, with alloy pins and come in hot dipped galvanized or self-colored styles. Each Shackle 25t and bigger comes equipped with an RFID chip that allows an inspector to check the product type, in-service date, date of last inspection, and the last recorded status from the previous examination. The RFID technology can reduce total inspection time up to 65%. The S2130 Crosby Bolt Type Anchor Shackles comes in either self-colored or hot dipped galvanized styles.

Crosby Bolt Type Anchor Shackles can be used in any application that screw pin or round pins are used. However, this shackle is recommended for use where long term connection is sought. The bolt type shackle has a secondary securement system with the nut and cotter that eliminates the need to tighten the pin before each lift. The shackle should still be inspected before every load.

Tway offers a variety of Crosby Bolt Type Anchor Shackles. Due to the strength of these high-quality shackles, the life expectancy can be greater than some of the leading competitors.

Additional Information

Also available in:
Weight N/A

1/2 in., 5/8 in., 3/4 in., 1 1/4 in.


2, 3.25, 4.75, 12

Use & Care:
  • Utilize the 45-degree quick check markings on the shackle to ensure load is correctly .
  • Inspect shackle for any damage before every load
  • Follow the capacity guidelines show in our capacity chart or stamped on the shackle.
Features and Benefits:
  • The shackles are quenched and tempered and can meet DNV impact requirements of 42 joules (31 ft. lbs.) at -20 degrees C (-4 degree F)
  • Meets or surpasses all criteria required of ASME B30.26
  • Shackles 25t and larger are RFID-equipped
  • All shackles are fatigue rated


Since 1945, Tway Lifting Products has partnered with The Crosby Group to provide top of the line products to our customers. Crosby is headquartered in Tulsa Oklahoma and manufacturers drop forged rigging fittings, crane blocks, wire rope sheaves and is the industry standard that the Federal Specifications reference in many instances. Mr. Tway was pleased to develop this relationship based on the range of the product line, the high-quality products, and an unmatched reputation for customer service.

Share This Product With Your Friend