• Where Rigging Comes From®

  • Quality Rigging Equipment Manufacturer Since 1945

Chicago Hardware
Machine Eye Bolts w/UNC Threads

Call For Pricing

0 out of 5

All Machine Eye Bolts are made from forged steel that is quenched and tempered. They are recommended for in-line pulling and meet or exceed all requirements of ASME B30.26. Eye bolts must be fully threaded into the hole prior to use.
Working Load Limit of 500-21000 Lbs.


Clear selection
SKU: MEB129. Categories: , .

Supplier :

Chicago Hardware

Email this page


Since 1912, Chicago Hardware has maintained the highest quality possible within their manufacturing process. Each eye bolt is made from drop forged steel that is heat treated following forging. They are offered in self-colored, zinc plated, and hot dipped galvanized. All Chicago Hardware products are made in the USA.

Machine eye bolts are designed with a safety factor of 5:1

Additional Information

Also available in:
Weight N/A

1 in., 1-1/4 in., 1-1/2 in., 1-3/4 in., 2 in., 2-1/4 in., 2-1/2 in.


1/4 in., 3/8 in., 5/8 in., 1/2 in., 3/4 in., 7/8 in., 1 in.

Use & Care:
  • For maximum working load limit, apply straight lift only.
  • Avoid angle lifts whenever possible
  • When angle lifts are required, never exceed angular lifts of 45° or more
  • Prevent any knots or ties on the sling.


For over 70 years, Tway Lifting Products has partnered with Columbus McKinnon to offer the finest hoists and level tools available anywhere. Columbus McKinnon is known for manufacturing high-quality hoist products that provide the best possible user experience. This level of quality aligns with what we work towards every day here at Tway.

Share This Product With Your Friend