Crosby SS-4055 Latch Kit for Old Style Hooks are Stainless Steel construction with Cadmium Plated Steel Nuts. Latch Kits are shipped packaged and unassembled. Instructions included for easy field assembly. These latches will not work on new “N” style Cosby Hooks.
Also available in:
.75 Ton Carbon or 1 Ton Alloy, 1 Ton Carbon or 1.5 Ton Alloy, 1.5 and 2 Ton Carbon or 2 and 3 Ton Alloy, 3 Ton Carbon or 4.5 Ton Alloy, 5 Ton Carbon or 7 Ton Alloy, 7.5 and 10 Ton Carbon or 11 and 15 Ton Alloy, 15 Ton Carbon or 22 Ton Alloy, 20 Ton Carbon or 30 Ton Alloy
Use and Care:
Always inspect hook and latch before using.
Never use a latch that is distorted or bent
Always make sure spring will force the latch against the tip of the hook
Always make sure hook supports the load. The latch must never support the load
When placing two (2) sling legs in hook, make sure the angle between legs is small enough and the legs are not tilted so that nothing bears against the bottom of the latch
Latches are intended to retain loose sling or devices under slack conditions
Latches are not intended to be an anti-fouling device
Since 1945, Tway Lifting Products has partnered with The Crosby Group to provide top of the line products to our customers. Crosby is headquartered in Tulsa Oklahoma and manufacturers drop forged rigging fittings, crane blocks, wire rope sheaves and is the industry standard that the Federal Specifications reference in many instances. Mr. Tway was pleased to develop this relationship based on the range of the product line, the high-quality products, and an unmatched reputation for customer service.
Crosby S209 Screw Pin Anchor Shackles. All Crosby Shackles are Quenched and Tempered with alloy pins. On every Crosby Shackle, the working load limit and safe use angle are stamped onto the shackle body. Working Load Limit of .5-12 Tons.
G403 Crosby 1/2″ Jaw & Eye Swivel. Crosby Jaw & Eye Swivels are hot dip galvanized and are quenched and tempered. Meets the performance requirements of Federal Specification RR-C-271F, Type VII, Class 3, except for those provisions required of the contractor. Working Load Limit of 3,600 Lbs.